SJB160 Light mortar mixer
WallGOE 160L cement mixer mortar portable electric concrete mixer SJB160 mortar mixer
1) Turn on the power. Wipe the stirring pot and the stirring blade with a damp cloth before mixing.
2) Pour the weighed cement and standard sand into the mixing pot.
3) Start the machine, add water after mixing for 5s, and add it in 20s-30s.
4) Stop the machine for 180±5s from the start of the machine.
5) Scrape the rubber sand stuck on the blade and remove the stirring pot.
6) After the end of the operation, the mixing blade and the stirring pot should be cleaned in time.
1. The case should be placed in an environment that is dry and free of any corrosive media.
2. After use, be sure to scrub and dry the inside of the tube and the stirring leaves with water. (Long-term non-users can prevent rust oil on the same surface and on the surface of the blade)
3. Always pay attention to whether the fasteners are loose after use and tighten them in time.
4. It is strictly forbidden to pinch iron nails, iron wire and other hard objects in cement and sand during feeding to avoid damage to the machine.
5. After using the gearbox for a period of time, check the level of the lubricating oil, and add it to the observation hole to see the oil surface. The oil with oil quality is 30#.
6. In case of repair and dumping, the oil in the oil pan must be drained first, and the oil should be changed once in the first quarter.
Cement Mortar Spray Machine
Mini Concrete Mixer Pump
Small Portable Concrete Pump
Grout For Concrete Pump
Foam Concrete Machine Germany
Concrete Road Plate Compactor
Copyright © Wenzhou Engineering Machinery Co.,Ltd All Rights Reserved.