Semi Automatic Wall Plastering Machine

Semi Automatic Wall Plastering Machine

Hot sell JP25 wet dry pre-mixed gypsum mortar wall cement spray plaster machine Device turn off and cleaning After finishing work, when the material is completely empty in the hopper, switch associated button off to stop device on the electronic control box. Open the spraying gun valve; remove...

Send Inquiry Chat Now

Hot sell JP25 wet dry pre-mixed gypsum mortar wall cement spray plaster machine

image002


Device turn off and cleaning

After finishing work, when the material is completely empty in the hopper, switch associated button off to stop device on the electronic control box. Open the spraying gun valve; remove the spraying gun for complete cleaning.

Note: Before the open spraying gun or hose, ensure no residual pressure.


Discharge the delivery hose, stator, rotor, pressure gauge assembly and inner plug the bottom of hopper, use water to wash thoroughly device. After cleaning, assemble them as the original structure.Re-plug socket and fill the hopper with full water. Restart the device a few seconds till the clean water is out from the hose end, so you can make sure the pump has been completely cleaned.

The method of cleaning the device completely: disconnect delivery hose and spraying gun, insert two pcs of cleaning sponge balls into delivery hose, then reconnect the delivery hose with machine, fill the hopper with water, start the device to make cleaning. Restart device secondly, the water in feeding hopper will pump the residue out from delivery hose.

When the two sponge balls are sent out from the rubber tube, clean the work is completed.





Hot Tags: semi automatic wall plastering machine, suppliers, manufacturers, discount, price, for sale
Related Products

Copyright © Wenzhou Engineering Machinery Co.,Ltd All Rights Reserved.