Mortar Plaster Spraying Machine

High Quality JP60 380v cement mortar plaster spraying machine/sand mortar spray plaster pump for wall building construction Test vibration motor ——Firstly, the electrical control box "Vibration switch" turns to "on", running about 20 seconds, then "Vibration switch"...

Send Inquiry Chat Now

High Quality JP60 380v cement mortar plaster spraying machine/sand mortar spray plaster pump for wall building construction

    


Test vibration motor

——Firstly, the electrical control box "Vibration switch" turns to "on", running about 20 seconds, then "Vibration switch" turns to "off" Repeat three times,  interval each time is more than 5 seconds. If the vibration motor responsive and reliable, it is qualified.

——Special attention: because different mortar consistency requires different vibrator amplitude. At this time, must open the cover at both ends of the vibration motor and adjust eccentric torque of eccentric vibrating block on the two ends of shaft.

Test pumping mortar forward and reverse

——Input certain amount of water into the hopper of mortar plastering machine

——Firstly turn the “delivery mortar forward & reverse switch” to “forward”, let the screw pump run about 20 seconds, then turn “delivery mortar forward & reverse switch” to “stop”. Then turn “mortar delivery forward & reverse switch” to “reverse”. Let the screw pump run about 10 seconds in the opposite direction, then turn “delivery mortar forward & reverse switch” to “stop”. Repeat above 3times, each interval time is less than 5 seconds. The mortar delivery motor is responsive and reliable in the operating process, which is qualified. (Note: when reverse and forward, there should be sufficient amount of water in feeding hopper).





Hot Tags: mortar plaster spraying machine, suppliers, manufacturers, discount, price, for sale
Related Products

Copyright © Wenzhou Engineering Machinery Co.,Ltd All Rights Reserved.