Wall Mortar Putty Spray Plastering Machine

JP15 Gypsum plaster machine with single phase new technology putty spraying machine Automatic plastering machine for wall The JP15 is a small mortar pump that is ideal for mixing, pumping and spraying. It can be used for cementitious adhesive and reinforcement mortar, spray plaster, textured...

Send Inquiry Chat Now

JP15 Gypsum plaster machine with single phase new technology putty spraying machine Automatic plastering machine for wall

The JP15 is a small mortar pump that is ideal for mixing, pumping and spraying. It can be used for cementitious adhesive and reinforcement mortar, spray plaster, textured plaster, fine plaster, levelling compound, thin skim coat and fire-protection mortar. It’s just the right plastering machine for those carrying out renovation and repair work. Its high mixing quality allows for joint and frame mortar. It injects and anchors with or without any pressure.




    



Operation Notes: 

Please connect well neutral wire and earth wire regardless of the selection of power sources, after power is ready, please rotate the positive/reverse switch of screw pump, the spiral conveying shaft should be rotated clockwise when mortar delivering. Before starting, check the button of air pump to ensure its normal operation. After connecting delivery hose, please mix a little of mixed lime and water and put into feeding hopper to deliver for lubrication of inner wall of delivery hose with thin slurry delivered to spraying gun, then start again, during the operation, if there is any jamming in screw pump body, delivery hose and spraying gun, please stop the machine to reduce the pressure, disassemble each connection to drain off pressure in the pipeline, after that, wash one by one before new installation and operation.


Hot Tags: wall mortar putty spray plastering machine, suppliers, manufacturers, discount, price, for sale
Related Products

Copyright © Wenzhou Engineering Machinery Co.,Ltd All Rights Reserved.