***The machine is working normally, but there is a phenomenon that the pulp is very slow or not pulped, probably because:
(1) The pump core has been worn for a long time and has been worn out to determine whether the pump core is worn or not. The pressure gauge can be connected between the pump outlet and the delivery hose. If the pressure gauge shows little or no pressure, the pump can be judged to be worn. Replace the pump with a new one. (General operating experience, it can be known whether the pump core has worn.)
(2) The part of the transmission slurry in the hopper is evacuated to form a space. The reason is that the slurry is too dry or the dry powder has poor fluidity and is not suitable for mechanical operation. In this case, the pump core will dry out due to no material, and soon This will cause the pump core to heat up and burn out.
(3) If the pressure gauge is connected, can the reading from the pressure gauge reflect whether the machine is working properly? If the pressure gauge is larger than 25kg and the discharge is slow or no discharge, the clogging failure may occur, the hose may shrink, and the risk of bursting may occur at any time. If the pressure is small or no pressure, the discharge is slow or not discharged. That means the pump core is worn
Hot Tags: dry spray concrete machine, suppliers, manufacturers, discount, price, for sale